IMX477 Sensor Module For Raspberry PI, Jetson Orin Nano With 8MP M12 Lens

Description 1,Description Innomaker low cost hq camera module cam-imx477 for raspberry pi,jetson nanao with 12.3M imx477 sensor support cs and c camera lens replace raspberry pi hq camera. cam-imx477 is a high quality camera module which adopts the IMX477R sensor, and requires a C- or CS-mount lens to work. Offers higher resolution (12.3MP) and higher sensitivity (nearly 50% greater area per pixel for improving low-light performance) than IMX219 cameras. The IMX477 12.3MP Camera is suitable for industrial and consumer applications like security camera, and other specialist optical devices which require higher level of visual fidelity, Support Raspberry PI5/ Pi4/ PI3B / PI3/ PI2/ PI B / PI A/ PI ZERO/ CM4/ CM3 / CM3/ Jetson Nano. Sensor Type: 12.3 Megappixel IMX477R Sensor, Static Images: 12.3MP, 4056 (H)×3040 (V), 7.9mm CMOS diagonal size, Support 1080p@30fps, 720p@60fps and 640x480p@90fps video record. support c/cs mount Lens, 20mm distance Lens seat with filter; Compatible with Raspberry PI5/Pi4/PI3B /PI3/PI2/PI B /PI A/PI ZERO/CM4/CM3 /CM3/Jetson Nano. Output: RAW12/10/8, COMP8, Board Size 38mm x 38mm. Packing List: cam-imx477, FPC Cable x2, 2,Specification Items HQ Camera Net price USD45.00 Size 38 x 38 Weight 30.4g Still resolution 12.3 Megapixels Video modes 2028 × 1080p50 2028 × 1520p40 1332 × 990p120 Sensor Sony IMX477 Sensor resolution 4056 x 3040 pixels Sensor image area 6.287mm x 4.712 mm (7.9mm diagonal) Pixel size 1.55 µm x 1.55 µm Optical size 1/2.3″ Focus Adjustable Depth of field N/A Focal length Depends on lens Horizontal Field of View (FoV) Depends on lens Vertical Field of View (FoV) Depends on lens Focal ratio (F-Stop) Depends on lens Maximum exposure times (seconds) 670.74 Lens Mount C/CS- or M12-mount NoIR version available? No Filter Yes   3,Packing List 1xCAM-IMX477(CS Lens Seat with Filter) 1x15-pin to 15-pin standard pi camera FFC cable 1x15-pin to 22-pin standard Pi camera FFC cable   4,Quick Start For Raspberry PI Series Step1, Modify config.txt sudo nano /boot/config.txt For the latest version raspberry Pi OS, it should be sudo nano /boot/firmware/config.txt Step2, Add below content to the last line dtoverlay=imx477 Step3, Reboot and use below command to preview libcamera-hello -t 0   5,Quick Start for Nvidia Series Step 1: Open the terminal and execute the following sudo /opt/nvidia/jetson-io/jetson-io.py Step 2: Select Configure Jetson Nano CSI Connector Step 3: Select Configure for compatible hardware Step 4: Select the camera that you want to use Camera IMX477 DUAL Step 5: Select Save pin changes Step 6: Select Save and reboot to reconfigure pins Step 7: Press any key on the keyboard and the device will reboot with the applied camera configuration   For CAM0 port nvgstcapture-1.0 sensor-id=0 For CAM1 port nvgstcapture-1.0 sensor-id=1   7,C/CS LENS CW-16MM-LENS-BLUE CW-16MM-LENS CW-6MM-LENS Focal Length: 16.0mm 16.0mm 6.0mm Optical Format: 1″(Φ16、12.8×9.6） 1″(Φ16、12.8×9.6） 1/2″ F/N: N/A N/A 1.2mm D/f’: F1.4-16 1：1.4 N/A Mount: C/CS C/CS Mount C/CS FOV 1″:44.6°*33.6° 2/3″:30.0°*23.2° 1/1.8″:24.7°*18.6° 1/2″:21.8°*16.4° 1″:44.6°*33.6° 2/3″:30.0°*23.2° 1/1.8″:24.7°*18.6° 1/2″:21.8°*16.4° 63° Back Focal Length： 17.53mm 17.53mm 7.53mm Optical length: 69.53mm N/A N/A Distortion: 1″ sensor (-0.7%), 1/2″ sensor(-0.5%), 1/3″ sensor(-0.15%) 0.05% N/A Iris Type: Manual Manual Manual MTF： 10Mega Pixel 10Mega Pixel 3Mega Pixel M.O.D: 0.2m 0.20m~∞ 0.2m Dimension: Φ39.0*50.00 Φ36.0*52.00 mm Φ30*34 Weight: 135.3g 110g 53g Operation: Zoom: Manual; Iris Type: Manual; Focus: Manual; N/A N/A Structure: Aluminum alloy 9G Aluminum alloy 9G Aluminum alloy 6G